ValRose Wood Works |
Disclaimer: Please note all information provided on this ValRoseWoodWorking web site is provided as helpful information. Insturctions and other information are not guaranteed to be complete or all incompensing. The final construction and use of items aquired from this site are subject to the personal interpretation of the reader, and their resultant use whether succesful or damaging in material or personal injury is the sole responsibilty of the reader. |
Plunge Router Jig mounted on a stand for convenient permanent setup. Vertical Table with Horizontal fence. Fence can be adjusted from 0 to 90 degrees in either direction. Can plunge mortise or dado as much as 25" long without moving the work piece, or infinite by sliding the.work piece. Jig Design from Wood Magazine April 2000, p62 |
Router Mortiser here is setup with a DW621 Plunge Router, including dust collection. Routing a 2 inch mortise in a 6" tall blank, to become a scrolled cut mission chair leg. |
Edge fence & jig removed from the bench mount (as shown on right most picture) then clamped to the workbence so to dado panels. |
